Archinect
anchor

Need information on Fluoroscape by Neil Denari.

Francisco David Boira

Hello everyone.
Espeis™ Archetype Gallery would like to showcase Fluoroscape. Does anyone here know roughly its overall dimensions? Thanks to all.

 
Dec 2, 06 12:37 pm

its about the size of a buick.

sorry, that's all i got.

Dec 2, 06 2:52 pm  · 
 · 
Francisco David Boira

thanks!..anyone else? .

Dec 3, 06 11:31 am  · 
 · 
bothands

you could probab;y figure ot out from the std. flourecent tube dim...

Dec 3, 06 4:49 pm  · 
 · 

Fluoroscape™?

It's big:



If you're getting it on loan, why don't you ask Sci-arc™ or Denari™?

Dec 3, 06 5:32 pm  · 
 · 

Let's try that again, with a person for scale:

Dec 3, 06 5:40 pm  · 
 · 
Francisco David Boira

Espeis™ emailed them this past friday but a weekend heads up from the archinect community never hurts.
Hopefully Denari's office will be able to provide some specific feedback this up coming week.
**The concern is more about its width than its lenght.
***We know that Fluoroscape is looking for venues to be exhibited.

Dec 3, 06 5:41 pm  · 
 · 
strlt_typ

contact steven fuchs or apleseed...i was reading the credits and they were on it...or you can get dot to pull out a measuring tape at sci-arc's fishbowl gallery...if he remembers approximately how much of the floor space it covered...

or, if you have the fishbowl's dimension, then based on the picture posted by sevensixfive, it looks as if the sides are six feet away from the walls.

at that part of sci-arcs building is about 35' wide...minus ten feet of circulation on one side...that leaves you with a 25' wide gallery...then subtract 12'(space around the thing)...so my guess is around 13' wide...

Dec 3, 06 6:04 pm  · 
 · 
Francisco David Boira

exellent dammson! Currently in NYC, next week in Miami...so stoping by Sci-ARC is a little bit out of the question.
Again exellent info!

Dec 3, 06 7:05 pm  · 
 · 
gvg

damn, I helped build it and I can't even remember.
It fit in the gallery that's all I needed to know
Those bays each have 4' long fixtures and there are 6 of them
so 24' + give it an extra inch on each side for the mount (12")
25 feet long yeah maybe 13' 14' for the width.

Where is Espeis located?

Dec 3, 06 11:19 pm  · 
 · 
Francisco David Boira

Williamsburg, Brooklyn

Dec 4, 06 6:07 pm  · 
 · 
headpaneer

It is 24' in length, 13' 6" wide and 5'6" tall. I work for the lighting manufacturer involved with the project.


Francisco, did you ever receive a response from NMDA?

Jan 5, 07 11:37 am  · 
 · 

Block this user


Are you sure you want to block this user and hide all related comments throughout the site?

Archinect


This is your first comment on Archinect. Your comment will be visible once approved.

  • ×Search in: