I've seen all type of fonts on plans, even strange hippie dippie bakery fonts.
So I wanted to know what font or fonts do you use in your plans?
Non Sequitur
Aug 10, 16 5:23 pm
Arial... and death to anyone who changes it back to city blue print.
David Cole, AIA
Aug 10, 16 5:25 pm
City Blueprint = the Comic Sans of construction documents
Josh Mings
Aug 10, 16 5:38 pm
Arial Narrow.
We roll hard at LBBA.
tduds
Aug 10, 16 5:42 pm
Open Sans.
Keep it clean.
Bench
Aug 10, 16 6:01 pm
Arial. 'nuff said.
I worked my first job for an architect who did all suburban house work, everything was in that faux-handwriting block letters (is that the City Blueprint?) - including the website. Painful...
Non Sequitur
Aug 10, 16 6:16 pm
I can always tell when the young'ins get lazy in the ofice and copy-paste old notes without proofreading. What's' that? Typewriter font? Come'on....
Bench city blueprint is one of the common hand script types.
Wood Guy
Aug 10, 16 6:27 pm
Calibri.
chigurh
Aug 10, 16 6:27 pm
century gothic
chigurh
Aug 10, 16 6:27 pm
balkins uses comic sans
lacalr
Aug 10, 16 6:35 pm
Arial Narrow as well. We tried to make the switch over to Myriad but it ended up not being worth all the hassle and initial inconsistencies.
David Cole, AIA
Aug 10, 16 6:59 pm
For working drawings, you can't go wrong with Arial or some common variant. Make sure you use something that everybody has on their computer, so it doesn't become an issue when exporting your drawings to a client or consultant. Nobody should have to install some precious proprietary font on their computer just to open your drawings.
curtkram
Aug 10, 16 9:20 pm
.
S W
Aug 10, 16 9:51 pm
Akzidenz Grotesk, Replica Sans, Aperçu, DIN and so on. There's so many decent typefaces to use for clarity in presentation.
Arial, Univers and Calibri are terrible in my opinion. Cheapskate, Facist and boring respectively.
urbanity
Aug 10, 16 9:55 pm
futura
S W
Aug 10, 16 10:10 pm
Not a bad choice at all urbanity, Kubrick used it on everything and Nike Just did it.
lacalr
Aug 11, 16 3:02 pm
Whats the point of using non traditional fonts that differ quite minimally from standard styles such as Arial and Calibri? IMO contractors and subs will not notice the difference at all on a set of CDs. On other sets of drawings and during other phases of design sure, I get that. But like David said earlier, using fonts that everyone doesn't have easy access too can create timely obstacles.
JeromeS
Aug 11, 16 3:16 pm
I'm using Walkway Expand Semi, these days for titles and labels.
Brud-G
Aug 11, 16 3:57 pm
Arial Narrow
thisisnotmyname
Aug 11, 16 4:33 pm
RomanS
awaiting_deletion
Aug 11, 16 6:36 pm
Arial. All caps...... Why all caps? because if you type in all caps everything fits between the 1/8" parrallel lines, nothing goes below the bottom....for all you milliniels who use lower case letters in Construction. Drawings.....If I ever catch one of you fucks I will smack you silly....learn to draft god damnit.
tduds
Aug 11, 16 6:54 pm
Hey now, poor typography is not limited to any one generation.
I've dealt with plenty of old fucks who don't see the beauty of all-caps notation.
Everyday Intern
Aug 11, 16 7:08 pm
I've heard more and more people complain about using all caps on drawings. Usually they claim that it is easier to read blocks of text in title case than it is in all caps.
I tell them to stop writing blocks of text on their drawings. If your notations contain more than a few words or short phrases, you're writing too much. Chances are you could have redone the drawing to be clearer, or your writing things on the drawings that belong in the specs.
Oh yeah ... Arial.
awaiting_deletion
Aug 11, 16 7:11 pm
but who really reads these drawings? graphically it just looks better all caps. like step away and squint while looking at text
......i like text justified to the side of the call-out. it throws me off when its left justified and the line or arrow are to the right.
BulgarBlogger
Aug 11, 16 7:44 pm
The reason people use Arial is because its clean and its the default Revit Font....
arch76
Aug 12, 16 2:15 am
romans
...we do a lot of concrete work-
Aug 12, 16 3:37 am
chigurh,
balkins uses comic sans
Ha!
However, I prefer to letter by hand. A good ol' calligraphy pen comes in handy.
Bench
Aug 12, 16 4:09 am
for all you milliniels who use lower case letters in Construction. Drawings
Right, because that's definitely a millennial thing. Dang kids! With their phones and their jeans and their facespace, trying to figure out who they are!
Aug 12, 16 4:17 am
Comic Sans is basically standard san-serif font that we use when we print by hand in a clean manner using a felt tip pen. You can certainly hand letter the font with a technical pen but many comic book fonts used for lettering the caption bubbles are written by hand with a technical pen and fine or ultra-fine felt tip pens.
Most basically lettering fonts we learn is school is basically comic sans (comic style san-serif) not typography or calligraphy lettering which is more elaborate than what the comic book artists were going to do. Comic San font designer modeled the font after the comic books.
Most hand lettering even by architects resembles comic sans more than the computer generated typographic fonts because most architectural lettering were basic handwriting in all caps.
awaiting_deletion
Aug 12, 16 7:35 am
no Bench, it really is, because if you were old enough to learn drafting on paper you would understand why All Caps is used and it does not mean we are angry.
Non Sequitur
Aug 12, 16 8:07 am
but, I am often angry when typing out CDs.
awaiting_deletion
Aug 12, 16 8:20 am
haha. yes I agree. READ THIS GOD DAMN BUILDER!!!!. wonder what would happen if I put exclamation points after Zoning references or Question marks on items I know examiners like to object to?
awaiting_deletion
Aug 12, 16 8:22 am
Bedroom, 180 SF, 18 SF Light, 9 SF Air? or Fire Rated Door? or EXIT?
curtkram
Aug 12, 16 9:10 am
i would like to see a movement towards more honest drafting notes.
<---- CLOSED CELL BACKER ROD. IF YOU USE AN OPEN CELL BACKER ROD, I WILL SET THE HOUNDS OF HELL UPON YOU. IF I SEE YELLOW STUFF ON SITE I KNOW WHAT THAT MEANS!
nicholass817
Aug 12, 16 9:24 am
Most hand lettering even by architects resembles comic sans...
Nope...block lettering looks very little like comic sans
Everyday Intern
Aug 12, 16 11:16 am
+1 curtkram
I get so tired of answering RFIs when the information is already in the specs so my note would be more like this ...
<----------- BACKER ROD. ALL THE REST OF THE STUFF YOU NEED TO KNOW IS IN THE SPECS. YES THAT BIG BOOK THAT SAYS "PROJECT MANUAL" ON THE FRONT (THE ONE YOU LEAVE IN THE JOB TRAILER FOR A DOOR STOP) CONTAINS THE SPECS. IT WILL TELL YOU WHETHER YOU SHOULD BE USING OPEN CELL OR CLOSED CELL OR BI-CELLULAR BACKER ROD. SEND ME A SUBMITTAL WITH THE WRONG TYPE, OR SEND ME AN RFI ASKING ME WHAT TYPE, AND I WILL SET THE HOUNDS OF HELL UPON YOU.
Non Sequitur
Aug 12, 16 11:22 am
All my notes should read:
<----- WHY BOTHER, YOU'LL JUST SEND ME THE SAME CUTSHEET FROM YOUR LAST "SIMILAR" PROJECT ANYWAYS.
null pointer
Aug 12, 16 11:51 am
Nolan.
Because fuck you guys and your default settings.
Everyday Intern
Aug 12, 16 12:06 pm
Non Sequitur wins.
Non Sequitur
Aug 12, 16 12:10 pm
^Cheers
cipyboy
Aug 12, 16 1:14 pm
Helvetica for presentation drawings, Arial/ Roman for Permit / CD
awaiting_deletion
Aug 12, 16 1:41 pm
remember when Bank Gothic was hot?
curtkram
Aug 12, 16 2:19 pm
no. bank gothic sucks. must have been the 80s?
awaiting_deletion
Aug 12, 16 2:20 pm
mid 90's in the midwest
Everyday Intern
Aug 12, 16 2:45 pm
^that explains why one of my professors used it all the time.
no_form
Aug 12, 16 3:14 pm
we use helvetica. easy to read. tracking is a little wide for my taste as even a concise note can get kind of long and or bulky on the page.
futura bold italic, 72 point, blood red. kruger style.
TedTedTed
Aug 15, 16 8:51 pm
Arial Narrow, which took a lot of convincing of people to move away from the Revit standard of Arial. I like that it takes up less space (I use it in Word, Excel, Bluebeam, etc.).
I always joke about wanting to produce a drawing set with everything typed out in Wingdings, though...
I typically use San Serif in my plans.
I've seen all type of fonts on plans, even strange hippie dippie bakery fonts.
So I wanted to know what font or fonts do you use in your plans?
Arial... and death to anyone who changes it back to city blue print.
City Blueprint = the Comic Sans of construction documents
Arial Narrow.
We roll hard at LBBA.
Open Sans.
Keep it clean.
Arial. 'nuff said.
I worked my first job for an architect who did all suburban house work, everything was in that faux-handwriting block letters (is that the City Blueprint?) - including the website. Painful...
I can always tell when the young'ins get lazy in the ofice and copy-paste old notes without proofreading. What's' that? Typewriter font? Come'on....
Bench city blueprint is one of the common hand script types.
Calibri.
century gothic
balkins uses comic sans
Arial Narrow as well. We tried to make the switch over to Myriad but it ended up not being worth all the hassle and initial inconsistencies.
For working drawings, you can't go wrong with Arial or some common variant. Make sure you use something that everybody has on their computer, so it doesn't become an issue when exporting your drawings to a client or consultant. Nobody should have to install some precious proprietary font on their computer just to open your drawings.
.
Akzidenz Grotesk, Replica Sans, Aperçu, DIN and so on. There's so many decent typefaces to use for clarity in presentation.
Arial, Univers and Calibri are terrible in my opinion. Cheapskate, Facist and boring respectively.
futura
Not a bad choice at all urbanity, Kubrick used it on everything and Nike Just did it.
Whats the point of using non traditional fonts that differ quite minimally from standard styles such as Arial and Calibri? IMO contractors and subs will not notice the difference at all on a set of CDs. On other sets of drawings and during other phases of design sure, I get that. But like David said earlier, using fonts that everyone doesn't have easy access too can create timely obstacles.
I'm using Walkway Expand Semi, these days for titles and labels.
Arial Narrow
RomanS
Arial. All caps...... Why all caps? because if you type in all caps everything fits between the 1/8" parrallel lines, nothing goes below the bottom....for all you milliniels who use lower case letters in Construction. Drawings.....If I ever catch one of you fucks I will smack you silly....learn to draft god damnit.
Hey now, poor typography is not limited to any one generation.
I've dealt with plenty of old fucks who don't see the beauty of all-caps notation.
I've heard more and more people complain about using all caps on drawings. Usually they claim that it is easier to read blocks of text in title case than it is in all caps.
I tell them to stop writing blocks of text on their drawings. If your notations contain more than a few words or short phrases, you're writing too much. Chances are you could have redone the drawing to be clearer, or your writing things on the drawings that belong in the specs.
Oh yeah ... Arial.
but who really reads these drawings? graphically it just looks better all caps. like step away and squint while looking at text ......i like text justified to the side of the call-out. it throws me off when its left justified and the line or arrow are to the right.
The reason people use Arial is because its clean and its the default Revit Font....
romans
...we do a lot of concrete work-
chigurh,
balkins uses comic sans
Ha!
However, I prefer to letter by hand. A good ol' calligraphy pen comes in handy.
for all you milliniels who use lower case letters in Construction. Drawings
Right, because that's definitely a millennial thing. Dang kids! With their phones and their jeans and their facespace, trying to figure out who they are!
Comic Sans is basically standard san-serif font that we use when we print by hand in a clean manner using a felt tip pen. You can certainly hand letter the font with a technical pen but many comic book fonts used for lettering the caption bubbles are written by hand with a technical pen and fine or ultra-fine felt tip pens.
Most basically lettering fonts we learn is school is basically comic sans (comic style san-serif) not typography or calligraphy lettering which is more elaborate than what the comic book artists were going to do. Comic San font designer modeled the font after the comic books.
Most hand lettering even by architects resembles comic sans more than the computer generated typographic fonts because most architectural lettering were basic handwriting in all caps.
no Bench, it really is, because if you were old enough to learn drafting on paper you would understand why All Caps is used and it does not mean we are angry.
but, I am often angry when typing out CDs.
haha. yes I agree. READ THIS GOD DAMN BUILDER!!!!. wonder what would happen if I put exclamation points after Zoning references or Question marks on items I know examiners like to object to?
Bedroom, 180 SF, 18 SF Light, 9 SF Air? or Fire Rated Door? or EXIT?
i would like to see a movement towards more honest drafting notes.
<---- CLOSED CELL BACKER ROD. IF YOU USE AN OPEN CELL BACKER ROD, I WILL SET THE HOUNDS OF HELL UPON YOU. IF I SEE YELLOW STUFF ON SITE I KNOW WHAT THAT MEANS!
Most hand lettering even by architects resembles comic sans...
Nope...block lettering looks very little like comic sans
+1 curtkram
I get so tired of answering RFIs when the information is already in the specs so my note would be more like this ...
<----------- BACKER ROD. ALL THE REST OF THE STUFF YOU NEED TO KNOW IS IN THE SPECS. YES THAT BIG BOOK THAT SAYS "PROJECT MANUAL" ON THE FRONT (THE ONE YOU LEAVE IN THE JOB TRAILER FOR A DOOR STOP) CONTAINS THE SPECS. IT WILL TELL YOU WHETHER YOU SHOULD BE USING OPEN CELL OR CLOSED CELL OR BI-CELLULAR BACKER ROD. SEND ME A SUBMITTAL WITH THE WRONG TYPE, OR SEND ME AN RFI ASKING ME WHAT TYPE, AND I WILL SET THE HOUNDS OF HELL UPON YOU.
All my notes should read:
<----- WHY BOTHER, YOU'LL JUST SEND ME THE SAME CUTSHEET FROM YOUR LAST "SIMILAR" PROJECT ANYWAYS.
Nolan.
Because fuck you guys and your default settings.
Non Sequitur wins.
^Cheers
Helvetica for presentation drawings, Arial/ Roman for Permit / CD
remember when Bank Gothic was hot?
no. bank gothic sucks. must have been the 80s?
mid 90's in the midwest
^that explains why one of my professors used it all the time.
we use helvetica. easy to read. tracking is a little wide for my taste as even a concise note can get kind of long and or bulky on the page.
Bank Gothic.......... ha ha ha.
https://www.youtube.com/watch?v=KLOgTz26BBs
Modern Architectural lettering:
https://www.youtube.com/watch?v=wBMUWILhw_I
More videos from the person who did the previous videos:
https://www.youtube.com/user/TheModmin/videos
https://www.youtube.com/watch?v=Ky5p-L_m6BQ
https://www.youtube.com/watch?v=s4A6zKSu9tg
Other architectural stuff from the guy who did the previous two videos because I thought they are good resource among many on the internet.
https://www.youtube.com/user/howtoarchitect/videos
Another video:
https://www.youtube.com/watch?v=z_wsxTHJbvg
Some more videos:
https://www.youtube.com/watch?v=iR7kHmdxBL4
https://www.youtube.com/channel/UCFvXZ6nm_Mwe3SNvdF3f8YQ/videos
you think helvetica is bad, try nolan.
futura bold italic, 72 point, blood red. kruger style.
Arial Narrow, which took a lot of convincing of people to move away from the Revit standard of Arial. I like that it takes up less space (I use it in Word, Excel, Bluebeam, etc.).
I always joke about wanting to produce a drawing set with everything typed out in Wingdings, though...